Single Lamp Controller for Smart Street Light Networks

Network Port Single Lamp Controller Complete Content

Product Specification Sheet of Network Port Single Lamp Controller

1 Description

1.1 Product Description

The single lamp controller is designed to solve a series of problems in urban lighting, such as heavy workload of street lamp inspection and operation and maintenance, non-intelligent management, and high energy consumption of lighting. Through a low-cost wireless communication method without new wiring, it can be uniformly connected to the lighting management platform to realize "lamp network" functions such as remote control, switching, dimming, and monitoring of street lamps; it can collect information such as current, voltage, and power, and realize automatic detection, fault alarm and other functions, or intelligently control according to traffic flow, pedestrian flow, illuminance, etc., so as to achieve automatic control, refined management and energy conservation and emission reduction of urban road lighting. The most important thing about the single lamp controller is the stability of the product and the stability of communication.

1.2 Version Description

All contents contained in this manual are protected by copyright law. No organization or individual may copy or reprint part of the entire manual in any form or means. Our company reserves the right to modify, interpret and issue this manual without prior notice.

2 Product Introduction

2.1 Product Features

Stable Transmission, No Self-Organizing Network Required: The network port RJ45 single lamp controller has stable transmission and does not require self-organizing network, making it an excellent choice for long-distance wireless transmission.

Stable Communication: The communication of the network port RJ45 single lamp controller is not affected by weather and terrain, ensuring the reliability of communication.

Intelligent Control: Flexible control to realize precise control of lamps, and intelligent management and monitoring of each lamp.

Intelligent Dimming: Supports 0-10V dimming, ensuring the dimming and on-demand lighting functions of street lamps, that is, turning on when it should be on and dimming when it should be dim, realizing precise dimming of lamps.

Energy Saving and Consumption Reduction: Combined with the latest lighting energy-saving technology, it can save about 30% of the comprehensive power consumption of urban street lamps, save manpower and material resources (inspection fees), reduce maintenance costs by 60%, and significantly improve social energy-saving benefits.

Data Collection: DC/AC voltage, current, power and electrical energy data collection.

Monitoring and Alarm: Feedback on abnormal states such as lamp current, voltage and power.

Fault Protection Mechanism: When communication is interrupted, the controller still controls the on/off/dimming of street lamps according to the operation strategy; when the equipment fails, a normally closed relay is used to ensure that the lighting is not affected.

2.2 Product Advantages

Low Cost: Uses standard RJ45 cables and crystal heads.

Fast Data Transmission: No signal attenuation, fast transmission, large capacity and fast response.

Easy Connection: No installation tools required, no IoT card fees.

Reliable Connection: Anti-vibration.

High Waterproof and Dustproof Level: IP67.

3 Product Appearance

Overall Dimensions: 143mm × 49mm × 32mm (Length × Width × Height)

Product Marking: Light controller Single Lamp Controller

Electrical Marking: INPUT AC85-265V, OUTPUT, DIM 0-10V/PWM

Communication Method: RJ45 Network Port

4 Technical Parameters

5 Wiring Method

5.1 Wiring Definition

Input Power Cable (2×1.0 Rubber Cable): Brown L Live Wire, Blue N Neutral Wire, Yellow-Green G Ground Wire

Output Power Cable (2×1.0 Rubber Cable): Brown L Live Wire, Blue N Neutral Wire, Yellow-Green G Ground Wire

Dimming Cable (2×0.5 Rubber Cable): Purple DIM+, Gray DIM-

5.2 Notes

The neutral wire, live wire and ground wire of the power supply must be connected correctly; otherwise, the lamp will not light up.

The dimming cable has positive and negative poles, and must not be connected reversely.

The ground wire of the controller's power output must be connected to the ground wire of the LED dimming drive power supply.

6 Installation Requirements

The product should be installed and placed in a place not prone to water accumulation to avoid long-term immersion in rainwater.

When installing and placing the single lamp controller, avoid reversing the positive and negative poles of the dimming.

Must strictly abide by the various safety regulations of the country and the place of use for wiring.

It should be fixed firmly during installation to avoid scratches and insulation damage of the lines.

When installing, if vertical placement is selected, it should be placed according to the arrow printed on the shell.

7 Non-Liability

Our company shall not be liable for any failure to use normally, incorrect installation, etc. caused by violating this operation manual or maintenance services provided by non-professionals.

The quality guarantee shall become invalid immediately after the controller shell is opened. For any technical and application issues, please contact our company's technical personnel.